ZENITH Series Cable Cleats
TECHNICAL DATA & CLASSIFICATION
TYPE: 6.1.1 Metallic 2BCAL – Two Bolt Aluminium Cable Cleat
DESIGN SPECIFICATION: IEC 61914
TEMPERATURE FOR PERMANENT APPLICATION: -60°C to 150°C
IEC 61914 clause / part 6.2
NEEDLE FLAME TEST:
Pass
IEC 61914 clause
10.0, 10.1, IEC 60695-11-5
LATERAL LOAD TEST: 18kN – 32kN, IEC 61914 clause 9.3
AXIAL LOAD TEST: 8kN, IEC 61914 clause 9.4
IMPACT RESISTANCE: Pass – Very heavy
IEC 61914 clause 6.3, 6.3.5, 9.2
MATERIAL: High pressure die cast aluminium
MATERIAL COLOUR: Silver / grey
Categories: Cable Cleats, Cable Equipment, General, Metalic Cable Cleats
Description
Reviews (0)
Be the first to review “ZENITH Series Cable Cleats” Cancel reply
Related products
FALCON Series Cable Cleats
FEATURES
- Third party certification to IEC 61914 Available in three different materials: • Nylon • Low Smoke & Fume (LSF), Zero Halogen (LS0H, Phosphorus Free and V0 Nylon • LUL approved polymer
- Sunlight (UV) & weather resistant
- Operating temperature -40°C to +60°C
- Can be double stacked
- 38 - 135mm in 8 sizes
- Excellent axial & lateral load retention
- Two bolt fixing design
SOVEREIGN Series Cable Cleats
FEATURES
- Third party certification to IEC 61914
- 316L stainless steel
- 17 - 128mm in 24 sizes for trefoil formation /application
- Short circuit rating of 190kA peak fault
- Operating temperature -50°C to +60°C
- Liners are classified as Low Smoke & Fume (LSF),
- Zero Halogen (LS0H) and Phosphorus Free
- Combined single (M12) and two bolt (M10) fixing design
BARTEC – Exproof Ex-e High Voltage / High Current Junction Boxes (≤ 10kV & ≤ 1500 Amp) for Ex-Zone 1
Technicial Specifications:
- Exproof Zone Class: Zone 1
- Exproof Protection: Ex II 2G Ex e II T6/T5/T4
- Protection Degree: IP66 (IP67 and IP68 optional)
- Ambient Temperature: -50°C ÷ +40°C (-50°C ÷ +60°C, in certain cases)
- Body Material: Stainless Steel 316L
- ATEX Certificate: DNV-2003-OSL-ATEX-0042
SCHUCH – Series e865 LED-Light Fitting for Ex-Zone 1/21
Technicial Specifications:
- Exproof Zone Class: Zone 1, 21 / Zone 2, 22
- Exproof Protection (Gases): II 2 G Ex eb mb op is q IIC T4 Gb
- Exproof Protection (Dusts): II 2 D Ex op is tb IIIC T80°C Db
- Protection Degree: IP66
- Power supply: 220-240V AC/DC, 0 or 50/60Hz
- Ambient Temperature: -30 °C to +55 °C
- Body Material: GRP
- ATEX Certificate: IBExU 16 ATEX 1008
- IECEx : IECEx IBE 16.0010
- Emergency Battery (e864 Series) Options Available!
BARTEC – Ex-d Protected Exproof Distribution Board
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 21 (Gases) - Zone 2 / 22 (Dusts)
- Exproof Protection (Gases): II 2G Ex d IIC T6..T3 Gb
- Exproof Protection (Dusts): II 2D Ex tb IIIC T85°C..T150°C Db
- Protection Degree: IP65 / IP66
- Power supply (PRC): Conventional ballast 230V - 50Hz (p.f. corrected - cos ρ ≥ 0,95)
- Ambient Temperature: -20 °C ÷ +40 °C (-55°C ÷ +55°C)
- Body Material: Glass-Fiber Reinforced Polyester, Steel Sheet, Stainless Steel
- ATEX Certificate: DEKRA I3ATEXO2O9
- OTHER AVAILABLE CERTIFICATES : IECEx, CU TR
RAYTEC – SPARTAN SPX LED Zone 1 High Power Floodlight for Ex-Zone 1/21
Technicial Specifications:
- Exproof Zone Class: Zone 1, 21
- Exproof Protection (Gases): Ex II 2G Ex db eb mb op is IIB+H2 T4 Gb
- Exproof Protection (Dusts): Ex II 2D Ex tb op is IIIC T104°C Db
- Protection Degree: IP66 / IP67
- Operating Voltage: 150-264V 50/60 Hz AC (110V AC Voltage Option is available.)
- Ambient Temperature: -50°C to +50°C
- Body Material: Corrosion Resistant Aluminum, epoxy powder coated
- ATEX Certificate: CML17ATEX1148
- IECEx : IEC Ex CML 17.0074
- Other Certifications: EAC Cert.; ABS Cert. # 15-LD1364539-1-PD
BARTEC – Ex-e Polyester Exproof Terminal Box (Hinged Cover) for Ex-Zone 1-21
Technicial Specifications:
- Exproof Zone Class: Zone 1, 21
- Exproof Protection: Ex II 2G Ex e ia/ib IIC T6, T5 Gb / Ex II 2D Ex tb IIIC T80 °C, T95 °C Db IP 66
- Protection Degree: IP66
- Ambient Temperature: -30°C ÷ +40°C (-30°C ÷ +55°C in certain cases)
- Body Material: Glass fiber Reinforced Polyester
- ATEX Certificate: PTB 08 ATEX 1066
- OTHER AVAILABLE CERTIFICATES: IECEx PTB 13.0017, TC RU C-SI.GB08.B.02262
Swedish Neutral Earth Fault Neutralization Device (GFN)
Product Description
The Ground Fault Neutralizer device is capable of fully compensating against all long-term phase-to-earth fault currents (both fundamental and harmonic). In addition, it performs this operation in a very short time. With the use of modern computers and power electronics, the fault current can be completely avoided. This is particularly useful in overhead line networks. It is also useful in industry and city center networks using cable. Because most of the cable faults start as single phase-to-ground. If the fault is not compensated properly, then multi-phase fault occurs by affecting other phases.
GET INFORMATION
Reviews
There are no reviews yet.