Exproof Lighting Fixture (Linear) is divided into two as LED or FLUORESCENT lamp…
No products were found matching your selection.
YOUR PROFESSIONAL SOLUTION PARTNER
- Home
- COMPANY
- Products
- Exproof Products
BARTEC – Exproof Ex-de Special Design Control Boxes for Ex-Zone 1- 21
Technicial Specifications:- Exproof Zone Class: Zone 1, 21
- Exproof Protection (Gases): Ex II 2 G Ex db eb ma/mb op is q ia/ib [ib] IIC T6…T3 Gb
- Exproof Protection (Dusts): ExII 2D Ex tb [ib] IIIC T80 °C…T130 °C Db
- Protection Degree: IP 66
- Ambient Temperature: -55°C ÷ +80°C
- Body Material: Aluminum, Glass-fibre Reinforced Polyester, Stainless Steel 316 L
- ATEX Certificate: IBExU 12 ATEX 1099
- OTHER AVAILABLE CERTIFICATES: IECEx IBE 12.0031X, TC RU C-DE.BH02.B.00177
BARTEC – Pressurized (Ex-p) Exproof Systems
Pressurized (Ex-p) Systems BARTEC offers an Ex solution to control and automate devices, machines and systems in Zones 1/21 and 2/22 in the form of pressurized containment Ex p systems. Depending on the application, control units and switchgears that are not Exproof protected, as well as automation systems are installed in the enclosure. Modern, ready-to-use Exproof solutions – including the required ATEX or IECEx certification – are created with modular, ATEX certified pressurized enclosures from BARTEC. Pressure containment solutions are designed for a wide range of ambient temperatures in temperature classes T3 to T5 GET INFORMATIONBARTEC – Ex-d Power Distribution Board
Technical Specifications:- Exproof Zone Class: hazardous areas - Zone 1 / 21 (Gases) - Zone 2 / 22 (Dusts)
- Exproof Protection (Gases): II 2G Ex de ia/ib m [ia/ib] IIC T5, T4
- Exproof Protection (Dusts): II 2D Ex td A21 IP 66/65 T 80°C, T 95°C
- Protection Degree: IP65 / IP66
- Ambient Temperature: -20 °C ÷ +40 °C (-55°C ÷ +55°C)
- Body Material: Glass-Fiber Reinforced Polyester, Steel Sheet, Stainless Steel
- ATEX Certificate: DEKRA I3ATEXO2O9
- OTHER AVAILABLE CERTIFICATES : IECEx, CU TR
- Cable Equipments
A2F Single Crimp (Unarmoured Cable) Exproof Cable Gland
Technical Details- One-squeeze ex-proof cable gland, compatible for non-armoured cables
- Cable gland suitable for use in ex-proof (suitable for use in explosive atmospheres) environments
- Body Material: Nickel plated brass – Brass – Stainless Steel – Aluminum
- IP Protection Class: IP66, IP67, IP68
- Operating Temperature : -60°C to +130°C standard
- Certification group: CE, ATEX, IECEx, CSA, EAC, Marine
- Zone Class: Zone 1 / Zone 20
- Has Deluge Protection feature
CMP Products – E1FW Type Double Tight Armored Exproof Cable Gland for Ex-Zone 1, 21 – 2, 22
Technical Details- Exproof Zone Class: Zone 1, 21 – Zone 2, 22
- Double tightening ex-proof cable gland, compatible for armored (steel and aluminum wire armor) cables
- Cable gland suitable for use in ex-proof (explosion proof) environments
- Body Material: Nickel Plated Brass – Brass – Aluminum
- IP Protection Class: IP66 standard, optionally IP67 and IP68
- Operating Temperature : -60°C to +130°C standard
- Certification group: ATEX, IECEx, CSA, Marine, EAC
- Deluge protection feature is optional.
CMP-Products – TRITON (T3CDS) Type Double Tight Armored Exproof Cable Gland for Ex-Zone 1, 21 – 2, 22
Cable Equipment, All Cable Equipment, Exproof Products, Exproof All Products, Exproof Cable Gland, GeneralTechnical Details- Exproof Zone Class: Zone 1, 21 – Zone 2, 22
- Compatible double-tight cable gland for armored (steel and aluminum wire armor) cables
- Cable gland suitable for use in ex-proof (explosion proof) environments
- Special design to prevent cold flow effects
- Deluge protection feature is available as standard
- Thanks to its special conical structure, it is suitable for use in all types of mesh and wire armor.
- Body Material: Nickel Plated Brass – Solid Brass – Aluminum – Stainless Steel
- IP Protection Class: IP66 standard, optionally IP67 and IP68
- Operating Temperature: -60°C to +130°C standard
- Certification group: ATEX, IECEx, CSA, Marine, EAC
- MV Products
Toshiba MV Voltage Regulator
MONOPHAZE MV REGULATOR Load changes in electrical systems over the years cause voltage imbalances (voltage rise or fall) in the energy supply system. This harms the power quality. To solve this problem, it is not economically reasonable to reorganize the overhead lines that have been made so far. Apart from this, methods such as the following are used to correct the voltage value; To increase the step value of the power transformers in the step-down centers, To make power factor correction by means of capacitor banks, Establishing new substations. Medium Voltage Mono-Phase Voltage Regulator has been proven to be the best cost/benefit solution to power quality problems caused by voltage imbalances all over the world. This solution can be easily used in downstream substations, private or operational substations with its flexible installation convenience. Making the voltage regulation from MV (medium voltage) to MV (medium voltage) provides both cost and ease of use compared to other solutions. GET INFORMATIONSwedish Neutral Earth Fault Neutralization Device (GFN)
GFN (Ground Fault Neutralizer) The Ground Fault Neutralizer device is capable of fully compensating against all long-term phase-to-earth fault currents (both fundamental and harmonic). In addition, it performs this operation in a very short time. With the use of modern computers and power electronics, the fault current can be completely avoided. This is particularly useful in overhead line networks. It is also useful in industry and city center networks using cable. Because most of the cable faults start as single phase-to-ground. If the fault is not compensated properly, then multi-phase fault occurs by affecting other phases. GET INFORMATION - Lighting Products
- Lighting Products
- Interior Lighting
- Downlights
- Rail Type Spot Lighting Luminaires
- Spot Lighting Luminaires
- Panel Lighting Luminaires
- Ceiling Lighting Luminaires
- Linear Lighting Luminaires
- Band Lighting Luminaires
- Etange Lighting Luminaires
- Raised Ceiling Lighting Luminaires
- Architectural Surface Mounted and Stalactite Lighting Luminaires
- Clean Room Lighting Luminaires
- Interior / Outdoor Hang-Up Lighting Luminaires
- Emergency Lighting & Baffle Lighting Luminaires
- Outdoor Lighting
- Interior Lighting
THORN – ALTIS GEN5 Area Floodlighting
High power LED floodlight for sports (from first class professional to recreational sports fields) and area lighting applications- BEST IN CLASS - High performance lighting up to 256klm with exceptional environmental resistance, excellent thermal and windage properties as well as a wide choice of outputs and precision optics
- INDIVIDUAL MODULE AIMING - Optical flexibility and modular construction enabling various combinations of optics, including the possibility to tilt each single LED module to minimize the number of luminaires and optimize the windage
- Excellent performance with the compact gearbox installed either on the frame of the luminaire or up to 200m remotely. The patented 'fishbone' design allows maximum air flow for thermal efficiency
- Fully controllable solution via DALI or RDM-DMX enabling instant lighting, stepped illumination levels and event lighting with dynamic lighting scenarios
- Intuitive design for an ease of installation, with a quick fix connection box, as well as multiple fixing options. Adjustable precision setting for accurate and fast module tilting and orientation
- To ensure suitability for your project applications, please use 'myProduct' to configure the required version. Your local Sales Team can assist with this process
THORN – AREAFLOOD PRO 2 Area Floodlighting
Application versatile floodlight luminaire with best in class optical performance and connectivity solutions- Full package product family of five luminaire sizes offering between 4,000 - 100,000 lumen outputs
- Integrating THORN's in-house designed and developed optic portfolio. Offering a total of 21 different light distributions covering area, road and sports applications
- Protecting Dark Skies and the nighttime environment, Areaflood Pro is available with THORN's Balanced White technology
- Designed with Dark Sky principals to limit light pollution, with 0 cd at 90° when mounted horizontally. Coupled with an accessory portfolio to further control light spill and light tresspass
- Improving sustainability by managing energy consumption, Areaflood Pro is compatible with THORN's UrbaSens connectivity solutions for Outdoor lighting applications
- Maintenance free solution. Product lifetime up to 100,000HR L95
- 6kV as standard (integrated in the driver)
- 10kV optional (additional device - specify using myProduct)
THORN – ARENA SYMPHONY Surface and Suspended Luminaires
Interior Lighting, Architectural Surface Mounted and Stalactite Lighting Luminaires, Lighting Products, GeneralInnovative LED luminaire with sound absorbing features to minimise sound reverberation in classrooms- Fully compliant with BB93 (measured for an empty classroom) for optimum classroom performance
- Achieves the acoustic and lighting standards with only 6 fittings in 56m² classrooms
- Wide range of control options, including simple ON/OFF, dimming and sensor
- Designed for flexibility offering a choice of infills to adapt the length of the system to match all classroom layouts
- Lighting Products
- Exproof Products
- SERVICES
- Projects
- Blog
- Contact
