FALCON Series Cable Cleats
FEATURES
- Third party certification to IEC 61914
Available in three different materials:
• Nylon
• Low Smoke & Fume (LSF), Zero Halogen (LS0H,
Phosphorus Free and V0 Nylon
• LUL approved polymer - Sunlight (UV) & weather resistant
- Operating temperature -40°C to +60°C
- Can be double stacked
- 38 – 135mm in 8 sizes
- Excellent axial & lateral load retention
- Two bolt fixing design
Categories: Cable Cleats, Cable Equipment, General, Plastic Cable Cleats
Description
Reviews (0)
Be the first to review “FALCON Series Cable Cleats” Cancel reply
Related products
BARTEC – EVAC lighting fixtures For incandescent and discharge lamps for Ex-Zone 1/2 – 21/22
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
- Exproof Protection (Gases): II 2 G Ex d IIC T6÷T2 Gb
- Exproof Protection (Dusts): II 2 D Ex tb IIIC T85°C-T225°C Db
- Protection Degree: IP66
- Power supply (PRC): Conventional ballast 230V - 50Hz (p.f. corrected - cos ρ ≥ 0,95)
- Ambient Temperature: -60 °C ÷ +60 °C
- Body Material: Marine grade copper free aluminium (control gear & lamp body)
- ATEX Certificate: INERIS 01 ATEX 0054X
- OTHER AVAILABLE CERTIFICATES : IECEx: IECEx INE 13.0075X - INMETRO: CEPEL 14.2311X - EAC: TC RU C-IT.ГБ08.В.01342 (-60°C÷+60°C) - RINA: ELE18111CS_015 - RUSSIAN MARINE CERTIFICATE (RMRS): 13.03516.315
SCHUCH – e8820 Series LED Exproof Explosion-protected LED floodlight (Zone 1, 21 Zone 2, 22)
Technicial Specifications:
Exproof Zone Class: Zone 1, 21 / Zone 2, 22
Exproof Protection (Gas): II 2 G Ex eb mb q IIC T4 Gb
Exproof Protection (Dust): II 2 D Ex tb IIIC T100 °C Db
IP rating: IP66
Rated voltage: 220 - 240 V, 0 Hz, 50/60 Hz
Tₐ: -30 °C to +55 °C
Housing Material: Die-cast aluminium
ATEX: IBExU 20 ATEX 1117
IECEx : IECEx IBE 20.0028
GET INFORMATION
BARTEC – Ex-d Power Distribution Board
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 21 (Gases) - Zone 2 / 22 (Dusts)
- Exproof Protection (Gases): II 2G Ex de ia/ib m [ia/ib] IIC T5, T4
- Exproof Protection (Dusts): II 2D Ex td A21 IP 66/65 T 80°C, T 95°C
- Protection Degree: IP65 / IP66
- Ambient Temperature: -20 °C ÷ +40 °C (-55°C ÷ +55°C)
- Body Material: Glass-Fiber Reinforced Polyester, Steel Sheet, Stainless Steel
- ATEX Certificate: DEKRA I3ATEXO2O9
- OTHER AVAILABLE CERTIFICATES : IECEx, CU TR
Swedish Neutral Earth Fault Neutralization Device (GFN)
Product Description
The Ground Fault Neutralizer device is capable of fully compensating against all long-term phase-to-earth fault currents (both fundamental and harmonic). In addition, it performs this operation in a very short time. With the use of modern computers and power electronics, the fault current can be completely avoided. This is particularly useful in overhead line networks. It is also useful in industry and city center networks using cable. Because most of the cable faults start as single phase-to-ground. If the fault is not compensated properly, then multi-phase fault occurs by affecting other phases.
GET INFORMATION
SCHUCH – Series e865 LED-Light Fitting for Ex-Zone 1/21
Technicial Specifications:
- Exproof Zone Class: Zone 1, 21 / Zone 2, 22
- Exproof Protection (Gases): II 2 G Ex eb mb op is q IIC T4 Gb
- Exproof Protection (Dusts): II 2 D Ex op is tb IIIC T80°C Db
- Protection Degree: IP66
- Power supply: 220-240V AC/DC, 0 or 50/60Hz
- Ambient Temperature: -30 °C to +55 °C
- Body Material: GRP
- ATEX Certificate: IBExU 16 ATEX 1008
- IECEx : IECEx IBE 16.0010
- Emergency Battery (e864 Series) Options Available!
BARTEC – Exproof Ex-e High Voltage / High Current Junction Boxes (≤ 10kV & ≤ 1500 Amp) for Ex-Zone 1
Technicial Specifications:
- Exproof Zone Class: Zone 1
- Exproof Protection: Ex II 2G Ex e II T6/T5/T4
- Protection Degree: IP66 (IP67 and IP68 optional)
- Ambient Temperature: -50°C ÷ +40°C (-50°C ÷ +60°C, in certain cases)
- Body Material: Stainless Steel 316L
- ATEX Certificate: DNV-2003-OSL-ATEX-0042
BARTEC – Ex-d Protected Exproof Distribution Board
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 21 (Gases) - Zone 2 / 22 (Dusts)
- Exproof Protection (Gases): II 2G Ex d IIC T6..T3 Gb
- Exproof Protection (Dusts): II 2D Ex tb IIIC T85°C..T150°C Db
- Protection Degree: IP65 / IP66
- Power supply (PRC): Conventional ballast 230V - 50Hz (p.f. corrected - cos ρ ≥ 0,95)
- Ambient Temperature: -20 °C ÷ +40 °C (-55°C ÷ +55°C)
- Body Material: Glass-Fiber Reinforced Polyester, Steel Sheet, Stainless Steel
- ATEX Certificate: DEKRA I3ATEXO2O9
- OTHER AVAILABLE CERTIFICATES : IECEx, CU TR
BARTEC-FN – SFD – SFDE Series Exproof Floodlight with Halogen and High Pressure Discharge Lampfor Ex-Zone 1 – 21
Technical Specifications:
- Exproof Zone Class: Zone 1 - 21
- Exproof Protection (Gases): Ex II 2G Ex d IIB + H2 T3/T2 Gb & Ex II 2 G Ex de IIB + H2 T3/T2 Gb
- Exproof Protection (Dusts): Ex II 2D Ex tb IIIC T200°C … T240°C Db
- Protection Degree: IP66
- Ambient Temperature: -20 °C ÷ +60 °C
- Body Material: Corrosion Resistant Copper-free Aluminum
- Diffuser : Toughened Glass
- ATEX Certificate: INERIS 01 ATEX 0018
- OTHER AVAILABLE CERTIFICATES : IECEx INE 15.0003X, CEPEL 15.2363X, TC RU C-IT.GB08.B.01342, RINA: ELE18111CS_014, RMRS: 13.03516.315
Reviews
There are no reviews yet.