CMP Products – THEMIS Series Single Cable Cleats
Technicial Specifications:
- Certificate obtained from an independent organization in accordance with IEC 61914 Standard
- 316L Stainless steel body
- Structure resistant to weather conditions and sunlight (UV)
- -60°C to +250°C standard operating temperature
- Fixing capacity in the cable outer diameter range of 38 mm – 109 mm
- 6 different size options
- Double bolt fixing design
- It has successfully passed BS5839 / BS8491 / EN50200 / BS8434 / AS-NZS 3013 fire tests.
Categories: All Cable Equipment, Cable Cleats, Cable Equipment, General, Metalic Cable Cleats
Description
Additional information
Brand |
CMP |
---|
Reviews (0)
Be the first to review “CMP Products – THEMIS Series Single Cable Cleats” Cancel reply
About brand
Parturient ut id tellus vulputatre ac ultrlices a part ouriesnt sapien dignissim partu rient a a inter drum vehicula. Ornare metus laoreet tincidunt eros rolem tristique pretium malada.
Cras rhoncus vivamus luctus platea arcu laoreet selm. Curae est condenectus sed hac a parturient vestibulum.
Related products
BARTEC-FN – SFD – SFDE Series Exproof Floodlight with Halogen and High Pressure Discharge Lampfor Ex-Zone 1 – 21
Technical Specifications:
- Exproof Zone Class: Zone 1 - 21
- Exproof Protection (Gases): Ex II 2G Ex d IIB + H2 T3/T2 Gb & Ex II 2 G Ex de IIB + H2 T3/T2 Gb
- Exproof Protection (Dusts): Ex II 2D Ex tb IIIC T200°C … T240°C Db
- Protection Degree: IP66
- Ambient Temperature: -20 °C ÷ +60 °C
- Body Material: Corrosion Resistant Copper-free Aluminum
- Diffuser : Toughened Glass
- ATEX Certificate: INERIS 01 ATEX 0018
- OTHER AVAILABLE CERTIFICATES : IECEx INE 15.0003X, CEPEL 15.2363X, TC RU C-IT.GB08.B.01342, RINA: ELE18111CS_014, RMRS: 13.03516.315
BARTEC – Exproof Ex-e High Voltage / High Current Junction Boxes (≤ 10kV & ≤ 1500 Amp) for Ex-Zone 1
Technicial Specifications:
- Exproof Zone Class: Zone 1
- Exproof Protection: Ex II 2G Ex e II T6/T5/T4
- Protection Degree: IP66 (IP67 and IP68 optional)
- Ambient Temperature: -50°C ÷ +40°C (-50°C ÷ +60°C, in certain cases)
- Body Material: Stainless Steel 316L
- ATEX Certificate: DNV-2003-OSL-ATEX-0042
RAYTEC LED – SPARTAN SPX Exproof Projector for Ex-Zone 1- 21
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 (Gases) - Zone 21 (Dusts)
- Exproof Protection (Gases): Ex II 2 G Ex e mb op is IIC T4 Gb
- Exproof Protection (Dusts): Ex II 2 D Ex tb op is IIIC T82°C Db
- Protection Degree: IP66 / IP67
- Power supply: 110-254V 50/60 Hz AC
- Low voltage: 18-48V AC and 18-69V DC
- Extra low voltage: 12V AC/DC
- Ambient Temperature: -50 °C ÷ +55 °C (The low temperature is -20°C for the battery-powered Emergency features.)
- Body Material: Corrosion Resistant Aluminum, epoxy powder coated
- ATEX Certificate: CML13ATEX3007
- IECEx Certificate: IEC Ex CML 14.0001
- OTHER AVAILABLE CERTIFICATES : UL/CSA, including C1D2; ABS Cert. # 15-LD1364539-1-PD
BARTEC – Pressurized (Ex-p) Exproof Systems
Product Description
BARTEC offers an Ex solution to control and automate devices, machines and systems in Zones 1/21 and 2/22 in the form of pressurized containment Ex p systems.
Depending on the application, control units and switchgears that are not Exproof protected, as well as automation systems are installed in the enclosure. Modern, ready-to-use Exproof solutions – including the required ATEX or IECEx certification – are created with modular, ATEX certified pressurized enclosures from BARTEC. Pressure containment solutions are designed for a wide range of ambient temperatures in temperature classes T3 to T5
GET INFORMATION
Swedish Neutral Earth Fault Neutralization Device (GFN)
Product Description
The Ground Fault Neutralizer device is capable of fully compensating against all long-term phase-to-earth fault currents (both fundamental and harmonic). In addition, it performs this operation in a very short time. With the use of modern computers and power electronics, the fault current can be completely avoided. This is particularly useful in overhead line networks. It is also useful in industry and city center networks using cable. Because most of the cable faults start as single phase-to-ground. If the fault is not compensated properly, then multi-phase fault occurs by affecting other phases.
GET INFORMATION
BARTEC- Series FN – SFLA / SFLP / SFLJ Lighting Fixtures for LED lamps for Ex-Zone 2/22
Technicial Specifications:
- Exproof Zone Class: Zone 2, 22
- Exproof Protection: II 3 G Ex ec IIC T4 Gc, II 3 D Ex tc IIIB T115°C Dc
- Protection Degree: IP66
- Ambient Temperature: -40°C to +60°C
- Body Material: Aluminum of Copper parts Suitable for High Corrosive Environment
- Diffuser : Toughened Glass (4mm)
- ATEX Certificate: INERIS 19 ATEX 3010X
- IECEx : IECEx IBE 16.0010
- EAC: TC RU C-IT.BH02.B.00602
SOVEREIGN Series Cable Cleats
FEATURES
- Third party certification to IEC 61914
- 316L stainless steel
- 17 - 128mm in 24 sizes for trefoil formation /application
- Short circuit rating of 190kA peak fault
- Operating temperature -50°C to +60°C
- Liners are classified as Low Smoke & Fume (LSF),
- Zero Halogen (LS0H) and Phosphorus Free
- Combined single (M12) and two bolt (M10) fixing design
SCHUCH – e855 Series With / Without Battery LED Exproof Exit Luminaire (Zone 1, 21 / Zone 2, 22)
Technical Properties
- Exproof Zone Class: Zone 1, 21 / Zone 2, 22
- Exproof Protection (Gas): II 2 G Ex eb mb op is q IIC T4 Gb
- Exproof Protection (Dust): II 2 D Ex op is tb IIIC T80°C Db
- Sealing Protection: IP66
- Operating Voltage: 220 – 240 V, 0 Hz, 50/60 Hz
- Operating Ambient Temperature: -30 °C to +60 °C
- Body Material: GRP
- ATEX Certificate: IBExU17ATEX1132
- IECEx : IECEx IBE 17.0037
- Emergency Battery (e856 Series) Options Available!
Reviews
There are no reviews yet.