CMP Products – CYCLONE-3 Series Cable Cleats
Technicial Specifications:
- Certificate obtained from an independent organization in accordance with IEC 61914:2009 Standard
- 180kA short circuit resistance
- 316L Stainless Steel Body
- Structure resistant to weather conditions and sunlight (UV)
- -50°C …+40°C standard operating temperature
- Fixing range for Trefoil cables 24 mm – 145 mm
- Fixing range for single cables 36 mm – 165 mm
- Fixing range for quad cables 21 mm – 124 mm
- Single bolt (M12) or double bolt (M10) fixing design
Categories: All Cable Equipment, Cable Cleats, Cable Equipment, General, Metalic Cable Cleats
Description
Reviews (0)
Be the first to review “CMP Products – CYCLONE-3 Series Cable Cleats” Cancel reply
Related products
SCHUCH – e8820 Series LED Exproof Explosion-protected LED floodlight (Zone 1, 21 Zone 2, 22)
Technicial Specifications:
Exproof Zone Class: Zone 1, 21 / Zone 2, 22
Exproof Protection (Gas): II 2 G Ex eb mb q IIC T4 Gb
Exproof Protection (Dust): II 2 D Ex tb IIIC T100 °C Db
IP rating: IP66
Rated voltage: 220 - 240 V, 0 Hz, 50/60 Hz
Tₐ: -30 °C to +55 °C
Housing Material: Die-cast aluminium
ATEX: IBExU 20 ATEX 1117
IECEx : IECEx IBE 20.0028
GET INFORMATION
BARTEC – Ex-d Power Distribution Board
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 21 (Gases) - Zone 2 / 22 (Dusts)
- Exproof Protection (Gases): II 2G Ex de ia/ib m [ia/ib] IIC T5, T4
- Exproof Protection (Dusts): II 2D Ex td A21 IP 66/65 T 80°C, T 95°C
- Protection Degree: IP65 / IP66
- Ambient Temperature: -20 °C ÷ +40 °C (-55°C ÷ +55°C)
- Body Material: Glass-Fiber Reinforced Polyester, Steel Sheet, Stainless Steel
- ATEX Certificate: DEKRA I3ATEXO2O9
- OTHER AVAILABLE CERTIFICATES : IECEx, CU TR
SCHUCH – Series e865 LED-Light Fitting for Ex-Zone 1/21
Technicial Specifications:
- Exproof Zone Class: Zone 1, 21 / Zone 2, 22
- Exproof Protection (Gases): II 2 G Ex eb mb op is q IIC T4 Gb
- Exproof Protection (Dusts): II 2 D Ex op is tb IIIC T80°C Db
- Protection Degree: IP66
- Power supply: 220-240V AC/DC, 0 or 50/60Hz
- Ambient Temperature: -30 °C to +55 °C
- Body Material: GRP
- ATEX Certificate: IBExU 16 ATEX 1008
- IECEx : IECEx IBE 16.0010
- Emergency Battery (e864 Series) Options Available!
Swedish Neutral Earth Fault Neutralization Device (GFN)
Product Description
The Ground Fault Neutralizer device is capable of fully compensating against all long-term phase-to-earth fault currents (both fundamental and harmonic). In addition, it performs this operation in a very short time. With the use of modern computers and power electronics, the fault current can be completely avoided. This is particularly useful in overhead line networks. It is also useful in industry and city center networks using cable. Because most of the cable faults start as single phase-to-ground. If the fault is not compensated properly, then multi-phase fault occurs by affecting other phases.
GET INFORMATION
BARTEC – EVAC lighting fixtures For incandescent and discharge lamps for Ex-Zone 1/2 – 21/22
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 2 (Gases) - Zone 21 / 22 (Dusts)
- Exproof Protection (Gases): II 2 G Ex d IIC T6÷T2 Gb
- Exproof Protection (Dusts): II 2 D Ex tb IIIC T85°C-T225°C Db
- Protection Degree: IP66
- Power supply (PRC): Conventional ballast 230V - 50Hz (p.f. corrected - cos ρ ≥ 0,95)
- Ambient Temperature: -60 °C ÷ +60 °C
- Body Material: Marine grade copper free aluminium (control gear & lamp body)
- ATEX Certificate: INERIS 01 ATEX 0054X
- OTHER AVAILABLE CERTIFICATES : IECEx: IECEx INE 13.0075X - INMETRO: CEPEL 14.2311X - EAC: TC RU C-IT.ГБ08.В.01342 (-60°C÷+60°C) - RINA: ELE18111CS_015 - RUSSIAN MARINE CERTIFICATE (RMRS): 13.03516.315
BARTEC-FN – AVC Series Fluorescent Exproof Lighting for Ex-Zone 1-21
Technical Specifications:
- Exproof Zone Class: Zone 1 - 21
- Exproof Protection (Gases): II 2 G Ex d e q IIC T4 Gb
- Exproof Protection (Dusts): II 2 D Ex tb IIIC T80°C Db
- Protection Degree: IP66
- Ambient Temperature: -20 °C to +60 °C
- Body Material: Glass Fiber Reinforced Polyester
- Protective Cover: UV resistant polycarbonate
- ATEX Certificate: LCIE 12 ATEX 3050X
- OTHER AVAILABLE CERTIFICATES : IECEx LCIE 12.0019X, Inmetro – CEPEL 15.2405X, EAC – TC RU C-IT.ГБ08.В.01342 (-40°C÷+60°C), Russian Marine Certificate – 13.03516.315
BARTEC-FN – SFD – SFDE LED Series Exproof Projector for Ex-Zone 1/21
Technical Specifications:
- Exproof Zone Class: hazardous areas - Zone 1 / 21 (Gases) - Zone 2 / 22 (Dusts)
- Exproof Protection (Gases): II 2 G Ex d IIB + H2 T6...T4 Gb or II 2 G Ex de IIB + H2 T6...T4 Gb
- Exproof Protection (Dusts): II 2 D Ex tb IIIC T85°C...T135°C Db
- Protection Degree: IP66
- Power supply: 100 - 277Vac electronic driver 50/60 Hz
- Ambient Temperature: -20 °C to +60 °C
- Life: 80,000 hours L80 B10 @ 25°C
- Standard Light Color: CCT 5700 K
- CRI > 70
- Body Material: Corrosion Resistant Copper-free Aluminum
- Diffuser : Toughened glass
- ATEX Certificate: INERIS 01 ATEX 0018
- OTHER AVAILABLE CERTIFICATES : IECEx INE 15.0003X, INMETRO: CEPEL 15.2363X, EAC: TC RU C-IT.BH02.B.00602, RINA: ELE18111CS_014, RUSSIAN MARINE CERTIFICATE – 19.02519.280
SCHUCH – e8825 Series LED High Bay Fitting for Ex-Zone (Zone 1, 21 / Zone 2, 22)
Technicial Specifications:
Exproof Zone Class: Zone 1, 21 / Zone 2, 22
Exproof Protection (Gas): II 2 G Ex eb mb q IIC T4 Gb
Exproof Protection (Dust): II 2 D Ex tb IIIC T100 °C Db
IP rating: IP66
Rated voltage: 220 - 240 V, 0 Hz, 50/60 Hz
Tₐ: -30 °C to +55 °C
Mounting material: Y-ropes 3301/3302 Y P, Ceiling brackets steel DW 8825 P
Housing Material: Aluminum Casting
ATEX: IBExU 20 ATEX 1117
IECEx : IECEx IBE 20.0028
GET INFORMATION
Reviews
There are no reviews yet.